Looking for 88mm brakes for Attack 13 demo

[graham418]

Looking for some new 88mm brakes to go on last years Attack 13 demo binders. Does anyone have any or could steer me in the right direction?

 

[trailtrimmer]

You need the 95mm brakes. Paging @Philpug

 

[Philpug]

Ther are 88 and 95mm brake options. I don't have any.

 

[silverback]

eBay

 

[PTskier]

4frnt uses re-labeled Tyrolia bindings. $27.
https://4frnt.com/products/binding-brakes?variant=2476077057

 

[graham418]

4frnt uses re-labeled Tyrolia bindings. $27.
https://4frnt.com/products/binding-brakes?variant=2476077057

I have already contacted them. They have no brakes for demo bindings.

I found some from Al's, but they want $80 shipping. Forget that.

 

[ARL67]

What width came with your bindings -> 115 ?

 

[Philpug]

You want a "D" brake, part # 163044. You cam look for a brake for a FreeFlex Evo 11 or Evo 14, RX12, and SP 7.5, 10 or 13.

 

[graham418]

i just received an email from my local ski shop. He has located them for me.

 

[graham418]

You want a "D" brake, part # 163044. You cam look for a brake for a FreeFlex Evo 11 or Evo 14, RX12, and SP 7.5, 10 or 13.

brake came in , #163044 85D. I thought they were going to be 88mm. they are a bit tight on the Z90's. Should i go with the 95? it seems a bit wide.
Is there actually an 88?

 

[Philpug]

brake came in , #163044 85D. I thought they were going to be 88mm. they are a bit tight on the Z90's. Should i go with the 95? it seems a bit wide.
Is there actually an 88?

Snug is fine, you can bend them slightly or dremel a little off of the inside part of the brake.

 

[graham418]

Snug is fine, you can bend them slightly or dremel a little off of the inside part of the brake.

Ok , I'll try and get them to do that. The tech looked a little sketchy about it . He seemed to think they were definitely too small . Before I pester his boss to order something that doesn't exist, does it exist? I seem to recall seeing 88mm mentioned in places.

 

[Philpug]

Ok , I'll try and get them to do that. The tech looked a little sketchy about it . He seemed to think they were definitely too small . Before I pester his boss to order something that doesn't exist, does it exist? I seem to recall seeing 88mm mentioned in places.

88 iIRC is for the new one, which is a different heel.

 

[graham418]

88 iIRC is for the new one, which is a different heel.

Ha. I had thought that 85 was the new one, and that 88 was the old one. . I'm so confused

 

[PinnacleJim]

88mm - 85mm = 3 mm = 0.118 inches or just under 1/8 inch. Can't believe your couldn't get those to work as suggested with a bit of Dremel work and/or bending.

 

[graham418]

88mm - 85mm = 3 mm = 0.118 inches or just under 1/8 inch. Can't believe your couldn't get those to work as suggested with a bit of Dremel work and/or bending.

Its not that.. I am making those work for a 90mm ski. Its that the literature shows an 85mm brake for the standard binding, and an 88mm for the demo binding, inferring that they are different somehow.

 

[BC.]

Just bend those babies!......and slap em on there.